Sponsored

Starlink Download Races to 200Mbps While Traveling at 100 Km/h!

Sponsored

Space Exploration Technologies Corporation’s (SpaceX) satellite internet constellation Starlink has been able to achieve blazingly fast download speeds while traveling at 100 kilometers per hour on a highway. Starlink, which uses a platter to connect to Low Earth Orbit (LEO) satellites for internet connectivity, was tested by a Twitter user in Australia, with the platter mounted on his Tesla Model X. The download speed test is one of the few of its kind. which attempts to measure the performance of the Internet service while the terminal is in motion. Starlink currently blocks terminals to the address provided by a user, and once the dish moves out of this zone, Internet coverage through it is impossible.

Starlink limits coverage once dish is 40 kilometers from registered address reveals Australian user

Today’s speed test was conducted by a user living in Perth, Australia, who decided to mount his satellite dish on his Tesla Model X and then test it on a road. The user, going through @harald_murphy on Twitter, proceeded to share the results of his tests on the social media platform. They reveal that despite traveling at high speeds, the Starlink user platter appears to run smoothly and offers high download speeds.

Starlink pre-order lead times may be shortened, research firm suggests as chip shortages diminish

According For Harold, his first-generation Starlink dish was able to achieve 200 Mbps in download speeds while his vehicle was traveling at a speed of 100 kilometers per hour. To ensure that the user terminal was not damaged or lost while traveling at such a high speed, he ensured that it was securely mounted to Model X via a custom bracket bolted to the rear of the vehicle.

The Australian user was also able to test the maximum reach of his plate. Due to a limited number of satellites in orbit, Starlink currently ‘blocks’ internet connectivity to the region around a user’s registered address. This allows the service to prevent your satellites from being overwhelmed at any time and also allows you to monitor coverage during the initial stage of service deployment.

This test revealed that the Internet service performed up to the standard or “[r]ock solid ” as Harald described in his tweet while he was at a maximum distance of 30 kilometers (km) from his home. However, after the 30 km mark, performance started to drop, and the test showed that the vehicle would travel another 10 km before the Starlink satellite dish stopped working.

In addition to the download speed of 200 Mbps, which the platter achieved relatively fast and managed to maintain throughout the race while the Model X traveled at 100 km / h, Starlink also managed to post an impressive upload speed of 17 Mbps. latency, which is the time it takes for a packet of information to travel to and from a user, were not available.

Several factors influence Starlink’s performance, such as the number of satellites serving an area, the number of users in a shell, and the location of the user. Today’s test follows one we reported on earlier this month, which showed that SpaceX’s internet service was capable of delivering a staggering 370 Mbps download speeds at an altitude of 9,300 feet in the Rocky Mountains in the US state of Colorado.

Starlink plans to bring Internet connectivity not only to rural areas but also to vehicles such as ships and airlines. For these, the company is developing new terminals, some of which will also carry radiation hazard warnings and will need to be installed by a professional.

Leave a Comment